No. 945. weight = 7 pounds 1.8 ounces. Case not included. We have the deluxe CMG Gig Bag for just $69, and a selection of hard cases at discounted prices available. MADE IN THE USA.
From the CMG site:
The Ashlee Semi Hollowbody features our unique “Calista Cut” style F Holes. The Ashlee Semi Hollow is a SOLID TOP Semi Hollow. I was using a Semi Hollowbody as my main guitar before we started building. I didn’t want to build a Semi Hollow model until we had something unique. You’ll find that we do!
Our standard Ashlee model has “masked” binding - meaning the top of the guitar is masked off from the side, allowing the natural beauty of the wood to show. Our lower horn is cut deeper than most single cut guitars. We’ve cut the horn back below the 22nd fret. This allows you to bend a whole step on the high E String to that last “E”.
Some features, specs:
Neck Construction: Two Piece
Neck Joint: Set Neck (Mortise and Tenon)
Top: Maple Arch Top- solid wood
Fretboard Radius: 12”
Width at Nut: 1.687”
Width at 12th Fret: 2.186”
1st Fret Thickness: .86”
10th fret thickness: .95”
Heel Depth: 1.620”
Body Thickness: 2.25”
Scale Length: 24.75” (24.562” actual)
Inlay: optional Block inlays on this custom
Finish: Nitrocellulose Lacquer
Frets: We use Stew Mac #141 Medium / High fret wire. Width is .095", Crown is .045", Tang is .073”. Our slot is .023”. Of course all fret measurements are prior to radius and fret work on the fret board.
A very fine US made Guitar with excellent playability & features. It's a good thing.....